Kit eGo AIO 1500mAh - Joyetech
The eGo AIO Starter Kit by Joyetech consists of an atomizer with a capacity of 2 ml and a conventional battery of 1500 mAh all in one block.
It has a system of airflow and a top filling all is provided anti-leakage and the advantage of having a child protection.
The kit works with BF SS316 resistance of 0.6 Ohm.
Comes in kit :
- 1 eGo AIO 1500 mAh
- 2 BF SS316 0.6 Ohm resistances
- 1 Drip tip in propeller
- 1 transparent Drip tip
- 1 micro-usb cable
- 1 user manual
Adjusting the airflow (airflow)
The airflow is adjusted by swiveling the top-cap (top) as you can see in the picture.
We recall that a tight airflow will favor the flavors while an airflow (open) will produce a larger volume of steam.
The AIO eGo is equipped with a led illuminating the reservoir on activation. It is possible to change this color to red, yellow, green, blue, indigo, white, or purple. To do this, turn off your vaporizer (5 successive presses) then hold down the button to scroll through the colors, release when you have made your choice.
Filling the tank
First, press the top-cap (top) and then unscrew it to access the tank. Then pour your e-liquid, being careful not to exceed the limit indicated on the image.
Change of resistance
As for the filling press the top-cap (upper part) then unscrew it. Screw / unscrew your resistance on the back of this part.
In order to avoid a burning taste when using your resistance for the first time, pour a few drops into the center hole of the resistor as in the picture. Wait 5 minutes for the cotton to imbibe properly, then steam !
Drip tip helical
The drip tip in propeller (delivered with the kit) is to be used in case you have spit back of liquid.
Recharging the battery
Simply plug your eGo AIO into a computer or AC power (faster).
Note that this vaporizer is equipped with Passtrough function allowing you to vape while charging the battery.
- Battery inclued
- 1500 mAh
- Temperature control
- Micro USB port
- 2 ml
- 19 mm
- 118 mm